I've had a Workfit-S dual monitor setup for about a year now, and I've been mostly happy with it. I was not pleased, however, that the keyboard tray did not rise high enough for comfortable use (I'm only 5'10"). You can see form the pictures I use a box to raise the height for use, which has worked mostly fine so far. The monitors are just about high enough, but not quite. So, today I went to look at the accessories for a solution (e.g., the adapter for tall people, which I am not). Looking at the dimensions again, I think I realized that my station is not moving through it's supposed full range of motion. I've attached some cell phone pics to show what I mean (sorry for the poor quality).
You can see from the "down position" that it does not push all the way down and the tray is at most about 1 inch below the desk surface at the point where it doesn't go down any more.
Additionally, I propped up a piece of 11X8.5 inch paper to show that the tray is only about 10 inches above the desk (and the about 4 inch box I use to raise the keyboard) in the up position when it won't raise any further.
I've looked through the directions several times for any adjustments I may have missed and can't find anything. I feel like it's improper for me to be using the min and max heights when I sit and stand respectively. Can anyone tell me if I'm missing something? Is this the typical range for your set-up? Is there a solution to this that will give me a more suitable range of motion, particularly making the keyboard raise another 4 inches or so for the up position?
Last edited by rfsmith
on Mon Dec 30, 2013 12:54 pm, edited 1 time in total.