DS100 upgrade kit dell p2715q monitors

DS100 upgrade kit dell p2715q monitors

Postby rocpatel » Wed Oct 12, 2016 8:46 pm

I just purchased 2 dell 27" monitors (dell P2715Q), and the spec says they 11lbs each. They also have a width of 25.23". I have a workfit-s, and the monitors do not fit on there. I was wondering if i purchased the ds100 upgrade kit, would the let me mount both monitors?

Posts: 1
Joined: Wed Oct 12, 2016 8:42 pm

Re: DS100 upgrade kit dell p2715q monitors

Postby ErgoAdam » Thu Oct 13, 2016 2:06 pm


No, the DS100 upgrade kit for the WorkFit-S can only accommodate monitors up to 24" diagonally.

Our LX Dual Side-by-Side arms would be able to support them, but that wouldn't exactly be an elegant solution for you.
http://www.ergotron.com/ProductsDetails ... fault.aspx

You might want to look at our WorkFit-TL with dual monitor accessory. Then you could have a similar type of unified sit-stand workstation.
http://www.ergotron.com/ProductsDetails ... fault.aspx

Let me know if you have any other questions!

Return to Workstations

Who is online

Users browsing this forum: No registered users and 1 guest