eizo s2231w

Will my display work with that?

eizo s2231w

Postby vetrofragile » Mon Feb 25, 2013 8:46 pm

do this http://www.ergotron.com/ProductsDetails ... fault.aspx
capable for eizo s2231w ? thank u
vetrofragile
 
Posts: 2
Joined: Mon Feb 25, 2013 8:38 pm

Re: eizo s2231w

Postby steveA » Tue Feb 26, 2013 10:30 am

My answer is "Maybe." For a 22" monitor, it is heavy and thick. The monitor's specifications show that it is right at the maximum allowable weight ofthe Neo-Flex Extend Arm. Therefore, to give you a "yes" or "no" answer, we would need to test that specific display model, which we have not.

If you can easily return the mount to where you would buy it, I would give it a try. If you cannot return the mount, do not purchase it.
steveA
Ergotron Employee
Ergotron Employee
 
Posts: 587
Joined: Tue Jun 29, 2010 9:31 am

Re: eizo s2231w

Postby vetrofragile » Tue Feb 26, 2013 3:25 pm

which model can I take?
vetrofragile
 
Posts: 2
Joined: Mon Feb 25, 2013 8:38 pm

Re: eizo s2231w

Postby steveA » Thu Feb 28, 2013 9:24 am

A very good choice for your display would be the MX Desk Mount Arm.
steveA
Ergotron Employee
Ergotron Employee
 
Posts: 587
Joined: Tue Jun 29, 2010 9:31 am

Re: eizo s2231w

Postby kadesh » Wed Nov 20, 2013 7:40 am

Can you tell me if this arm is compatible with my eizo s2231w : http://www.ergotron.com/tabid/65/PRDID/351/default.aspx

thank you
kadesh
 
Posts: 5
Joined: Wed Nov 20, 2013 7:34 am

Re: eizo s2231w

Postby steveA » Wed Nov 20, 2013 8:04 am

Yes, the Eizo s2231w should work with any of our LX arms.
Last edited by steveA on Wed Nov 20, 2013 8:09 am, edited 1 time in total.
steveA
Ergotron Employee
Ergotron Employee
 
Posts: 587
Joined: Tue Jun 29, 2010 9:31 am

Re: eizo s2231w

Postby kadesh » Wed Nov 20, 2013 8:07 am

Thank you for this quick answer
kadesh
 
Posts: 5
Joined: Wed Nov 20, 2013 7:34 am

Re: eizo s2231w

Postby kadesh » Fri Nov 22, 2013 2:40 am

And for this ancient model : http://www.ergotron.com/Portals/0/liter ... 05-056.pdf

??

(Sorry for the double post)
kadesh
 
Posts: 5
Joined: Wed Nov 20, 2013 7:34 am

Re: eizo s2231w

Postby steveA » Fri Nov 22, 2013 4:57 pm

For the older LX arm, I would say no. Back then, the LX was very sensitive to monitor thickness, which means a thick monitor would de-rate the weight capacity. That Eizo is thick enough so that the effective weight capacity of the older arm would be under 18 lbs. The newer LX, besides having shiny polished-aluminum construction, has improved strength.
steveA
Ergotron Employee
Ergotron Employee
 
Posts: 587
Joined: Tue Jun 29, 2010 9:31 am

Re: eizo s2231w

Postby kadesh » Mon Dec 02, 2013 4:24 pm

Hi,

I bought it anyway because it was very cheap and the screen is almost 18 lbs.

But I have a problem with the head of the articulated arm : it is not compatible with the screws holes on the screen.

Look at this picture :

    Image
The head of the arm is too small.

Look at the next picture, the head of my older fixed support is much larger than the head of my new articulated arm :

    Image

Can I buy an adapter for the head?

Thanks for your help.
kadesh
 
Posts: 5
Joined: Wed Nov 20, 2013 7:34 am

Next

Return to Display Compatibility

Who is online

Users browsing this forum: No registered users and 3 guests

cron